Why Use a Baitcast Reel?

Last Updated: 18.09.19

 

As we can learn from this Black Max Reel Review and from many expert anglers, a baitcast reel is mainly used for catching heavier types of fish and is the sort of fishing gear that you would use once you are not a beginner anymore. Here is all the information you need to know before buying a baitcast fishing reel.

General information

Many baitcaster reels offer a big advantage over other types of reels, such as the spincast reels, because you can use heavier lines together with heavier lures and go fishing in areas where you can catch larger game. However, they can prove to be complicated to use if you don’t have them properly tuned.

If you don’t know exactly what you are doing, they can backlash, causing you problems. Let’s go step by step through the casting procedure to learn exactly where to use these baitcast reels and how to use them correctly and efficiently.

One of the neatest things regarding baitcasting reels is that they are designed to fit in the palm of your hand. Many times this gives you additional leverage and moreover, it gives you the possibility to work baits a little bit easier. This is why many anglers prefer this on professional tours. In addition, the line that can be handled by this fishing reel is much thicker.

A 17-pound-test line poses no problems to a baitcasting reel, whereas, on spinning gear, the only way it could handle that same line would be by having a much larger dimension. A lot of the rods that come with baitcasting reels can be heavier and even longer than the ones that come with spinning reels.

This means that the angler can cast heavier baits, like big spinnerbaits or big jigs. Considering this, we can see that right off the bat the baitcasting reels have an advantage, physically speaking.

 

The anatomy of a baitcasting reel

One of the main components of the baitcasting reel is the spool release. By pushing the thumb on this part, the spool is released and it will revolve. By turning the handle or the crank, it engages again. Another important piece of the reel is the drag system. This is often controlled via a star-shaped handle.

You can turn this star forwards or backward applying more or less force and thus modifying the drag that you have. Another key component that any angler has to pay attention to, is the spool adjustment cap which is located just behind the handle. By turning it and tightening it, it puts pressure on the spool and can make it slow down, so it doesn’t backlash as often.

The centrifugal brakes are the last main component of this kind of reel. To adjust these breaks, you first have to remove the cover, usually by unscrewing, but keep in mind that this may vary from model to model. Inside you will find a number of centrifugal brakes, which are nothing other than some small plastic cylinders that glide on metal rails.

When the brakes are activated, in other words, when the spool is spinning at a considerable speed, the centrifugal force pushes the small plastic pieces against a drum found around the mechanism. This process slows your spool down.

There are 6 brakes in total placed in a circular pattern and you have the option to activate as many as you want, by pulling on the previously mentioned plastic pieces. They have two distinct positions and you can feel the brakes clicking into place once they are activated or deactivated.

When you are learning, you might want to start with three or four breaking pins activated, and after a while, you can use your fishing rod with only two.

 

Reasons to use a baitcasting reel

When anglers first try to use a baitcasting reel, it can be extremely annoying and frustrating. However, once you learn the correct procedures you must do when casting, you’ll quickly understand why many anglers choose this type of fishing reel. At first, baitcasting reels were used only in saltwater fishing to catch game like the marlin.

Later, anglers started using these reels on lakes as well to catch bass or other kinds of large fish. The used fishing technique when having a baitcasting reel is a bit more complicated than in the case of other reel types.

These reels are situated over the pole and the main reason why anglers need some experience before fishing with these reels is that you have to control both the coil as well as the bait arrangement with your thumb.

If you do not set your spool adjustment just right, and many beginners don’t, the risk of a backlash is higher. This means that your spool will continue to spin even after the line no longer leaves the coil. This makes a tangled mess on your coil and this is why this problem is often referred to as a bird’s nest.

Because baitcasting reels are larger, they can accommodate larger lines and more massive baits, which translates in the possibility of catching a bigger game. If you use heavier bait, then you can fish at high speeds and by taking advantage of the heavy-duty lines, you can put higher pressure on it without fearing it will break.

Many times, fishing for bass requires the angler to place the bait in a precise spot. This fishing equipment allows you to do just that. Therefore the chances of you catching that fish are higher because you have much more control over your bait placement. Moreover, once the fish is on the hook, the close position of the reel on the pole gives you more leverage.

There is always the possibility of becoming a professional angler even if you never fished with a baitcasting reel. However, keep in mind that a complete angler, especially a deep-sea angler always has this type of reel in his/her arsenal. If you are after sailfish, bass, tuna or marlin, especially in rough waters, you definitely need a baitcasting reel.

 

 

1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

Leave a Reply

avatar
  Subscribe  
Notify of