Best Fixed Blade Hunting Knife

Last Updated: 13.07.19

Fixed Blade Hunting Knives – Buying Guide, Reviews, and Comparison


If you don’t have the time to search for the best fixed blade knife for hunting money can buy but are still some suggestions for good a product that will suit your needs well, then you came to the right place. After consulting a high number of hunting knife reviews, both from amateur and experienced outdoorsmen alike, we reached the conclusion that the Morakniv M-11824 is the product that might help you the most. Its patterned plastic handle and the inox steel blade will hold remarkably well over time to water, dirt and all the adverse environmental factors you might encounter. Resilience doesn’t come at the expense of cutting ability, however, since the Scandi patented grid offers superior sharpness to blades made out of a similar material. If you’re looking for the versatility a single knife can’t provide, then you might be interested in the Uncle Henry UHCOM2CP combo.



Comparison table


The Good
The Bad



Our top choices


With so many items to choose from out there, finding a good knife for hunting might be a chore. Based on the positive feedback they received for their quality as well as value, we made a short selection of top hunting knives for your consideration.   



Morakniv M-11824


This Morakniv product is an all-around reliable companion knife to have around a camp. At only around 8.5 inches in length, with a 4.1-inch blade, it won’t get in your way when hiking while also providing a dependable tool for carving wood, cutting small tree branches, preparing your food or cutting cords.   

While it’s really not meant for tough tasks, like batoning or dislodging pelvic bones from large game, customers found its resilience to adverse environmental conditions very attractive. Being plastic, the handle doesn’t cheap away or rot and the 12C27 hard stainless steel blade holds up to rust particularly well, which makes it especially suitable for fishermen.  

Its edge is as sharp as you would expect from any hunting knife, however. With an HRC 56-58 Rockwell rating, the blade can hold to a very fine edge for a considerable amount of time.  

However, this might require some skill to sharpen once it eventually wears off, as this Morakniv knife features a Scandi type grid, which does offer superior cutting potential (due to the fact that the revel comes at a straight line to the grid) but at the cost of higher maintenance demands.

Buy from for ($17.22)





Uncle Henry UHCOM2CP


Highly appreciated for the value provided, this Uncle Henry combo is intended to cover all the demands of an outdoorsman when it comes to cutting tools.

It features two knives: one that is basically a gutting blade and a multi-purpose utility piece. These work side by side, with the gutter’s rounded edge and blunt point being complemented by the superior piercing ability of the drop point utility knife.

While compact and fairly light, the two knives are particularly durable and well made, leaving many customers impressed with the thickness of their blades, which will make them suitable for a wide array of punishing tasks.  

The material used was 7Cr17MoV high carbon stainless steel to ensure for a sharp edge that keeps well over time.

The gutting knife has a full tang, for added durability when going through bone. And what we found a nice touch, a separate guard to keep your hands from slipping. We must mention the absence of a gut hook, which might make this knife harder to use by inexperienced hunters.

As an added note, this set is made in the US, which means it has been manufactured under high-quality production standards.

Buy from for ($40.16)





Elk Ridge ER-052


This Elk Ridge is a very handsome knife, with a shiny Hawk’s bill blade (a.k.a skinning blade) mounted on a nicely curved pakka wood overlay handle. The full tang gives the handle good durability and eliminates breaking points along its surface.

The 5-inch blade had been found to be rather sturdy as well, rigid and thick enough for cutting tree branches or field dressing game. According to the item’s description, it is made of 440 proof, high carbon stainless steel, which should give it good edge retention and superior sharpness, as well as good corrosion resistance.  

As a rarely seen feature, the ER-052 also has two blood grooves on one of the sides of the blade. These might come in use when stabbing an animal, but their primary purpose is usually that of increasing blade rigidity and making it slightly lighter.  

The most common complaint this knife has received regards the sharpness, edge retention and corrosion resistance of the blade, with many customers finding them unsatisfactory to the point of doubting that it’s actually made of 440 stainless steel. We recommend you opt for a good warranty if you choose to purchase but

Buy from for ($17)





Buying guide


It’s hard to say that there is such a thing as a best fixed blade hunting knife since they are supposed to be jacks of all trades. A highly specialized model, like a blunt, tipped gutting knife, won’t be very good at anything else than field dressing, for example. You have to seriously consider your needs before buying, and maybe supplement your general purpose piece with something that will provide better functionality for a specific task. With this being said, what are the main things to look for when buying a knife?


A good hunting knife must be tough, in order to handle heavy-duty jobs like batoning or cutting through the bones of large game, but also resistant to oxidation, since it will spend a lot of time exposed to wet, mountainous climates.

Toughness is given by the thickness and shape of the blade, but also its construction. A good general purpose blade will be around 3-3,5 mm thick on its spine, at a length of around 4-5 inches. The section also contributes to resistance, with taller spines making for sturdier knives.

The tang is the metal part that continues from the blade into the handle. This gives the handle increased durability, and should ideally go all the way through it.


High carbon vs. stainless steel

As the name suggests, stainless steel (the “stains” being the black iron oxide) is particularly resistant to oxidation and should be preferred for those who plan on using their knives near water.

While a lot of manufacturers refer to the materials they use as “high carbon stainless steel” — because of the extra carbon they have viz “regular” stainless steel — this should not be confused with the common usage of the term “high carbon steel”.

This refers to mixes that are significantly harder than most stainless varieties and can hold a sharper edge for a longer time. However, these tend to rust very easy if untreated, and even if a coating is applied, are not considered to perform as well as stainless steel.



Arguably, size, cutting ability and ease of maintenance give a knife its convenience value. A small knife will always prove preferable for hiking, dealing with mundane tasks around the camp or preparing food, although you might want a bigger model if you plan on using it like an axe.

Stainless steel units are overwhelmingly easier to maintain. Being softer they are easier to sharpen and they are also easier to clean, in that you won’t have to bother that much with it.

Also look to the hilt material. Wood might be tough and might looks nice, but it’s not as cheap to replace and easy to clean as plastic or rubber.


1 Star2 Stars3 Stars4 Stars5 Stars (5 votes, average: 5.00 out of 5)

Leave a Reply

Notify of